![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.eu/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
English
GermanAutomotive
Thanks to our portfolio of industry-leading manufacturers, we are able to offer a wide selection of AEC-Q200 compliant resistors as well as some AEC-Q100 qualified sensors.
Our resistor range developed for automotive applications such as electric vehicle charging and battery management systems includes a selection of high-quality current sensing resistors and shunts by Isabellenhütte in addition to a variety of thin-film and metal-foil chip resistors by Susumu which are compliant to the automotive AEC-Q200 standard.
We also offer a range of sensor products meeting AEC-Q100 qualifications including foil thermocouple temperature sensors by RdF, pressure sensors by Merit Sensor, load cells from Stellar Technology and NVE’s smart magnetometer based on their TMR technology.
The IVT-S module from Isabellenhütte, is an innovative solution for battery management system applications. This plug-and-play sensor is ideal for precise current and voltage measurement and is widely used within the automotive industry.
- NP0 (C0G) Chip ceramic capacitor with negative TC
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC Capacitor for RF and Microwave communication
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC high power, low capacitance variation with voltage capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance under 20000 MOhm or 500 Ohm-Farad at 25°C under 500V
- Dielectric strength test performed per method 103 of EIA 198-2-E
- High Temperature, ultra stable MLCC Capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- High Temperature MLCC Capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- High quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- High quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Low inductance capacitors for high energy transfer
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 2.5% at 1KHz
- Insulation resistance of 20°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less
- Stable ceramic capacitor
- Better voltage behaviour compared to X7R dielectric
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Non magnetic NP0 (Type 1) MLCC Capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Non magnetic X7R (Type 2) MLCC Capacitors
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor maximum of 2.5% at 1Vrms and 1kHz for Un between 16V and 25V and maximum 1% at 1Vrms and 1kHz for Un between 25V and 50V
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Radial dipped NP0 capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
