+49 9337 9712-520

Industrial

RARA SMW Series

High-power wire wound surface-mount resistors
Power ratings available: 2W, 3W, and 5W
Wide resistance range: 0.1Ω to 500Ω
Precision tolerances: ±1% & ±5%
Temperature coefficient: 200 ppm/°C
Flameproof UL94V0 molded package for high safety

Cissoid CMT-PLA3SB12340A

Silicon Carbide (SiC) MOSFET Intelligent Power Module
3-phase inverter with anti-parallel diodes
Drain-to-source Breakdown Voltage of 1200V
Max Continuous Current of 340A/260A at Tc=25°C/90°C
Low On Resistance of 3.25 mΩ typical
Junction Temperature: -40°C to +175°C

Caddock TG Series

Precision high voltage axial leaded through-hole resistor
Maximum operating voltage from 4kV up to 30kV (standard series)
Utilises Caddock’s Tetrinox® resistance film to achieve the unique combination of low TCR and high stability performance
Load life stability of 0.25% per 1,000 hours at +125°C
-15 series increases the maximum voltage ratings by 60% (48kV for the TG1015 model)
Maximum continuous operating temperature of +225°C

CotoMOS® C224S

High-current MOSFET relay
Load Voltage: 40V
Load Current: 3.5A
Low On-Resistance: 0.05Ω Nominal
Arc-Free with no Snubbing Circuits
High-Reliability Solid State Design

CotoMOS® C241S

High-current MOSFET relay
Provides 1500V of input to output isolation.
High current switching capability to 5A
Low on resistance of 0.02Ω Nominal
Arc-Free with no Snubbing Circuits
High-Reliability Solid State Design

Coto 9290 Series

Surface-mount SIP reed relays
High insulation resistance of 10¹²Ω minimum
Switching current 0.5A
50Ω Coaxial shield
Moulded 6 pin SIP package with optional gull wing or J-lead connections
Temperature range −20°C to +85°C

Merit Sensor HTS Series

Surface mountable analog and digital pressure sensor
Pressure ranges from 1 to 100 psi
Absolute or Gauge options available
Temperature range −40°C to +125°C
Compatible with wet, corrosive media

Merit Sensor S Series

Precision MEMS silicon pressure sensor die
Pressure ranges of 5 to 300psi / 0.34 to 21 bar
Pressure type of absolute or gauge
Temperature range −40°C to +150°C
Full scale outputs from 60mV to 180mV (at 5V excitation)
Impedance of 5kΩ (typical)
Suitable for clean, dry air and non-corrosive gases media

NVE AD004-00E

Digital NPN Open-Collector output
4.5Vcc to 30Vcc supply voltage
MSOP8 package
2.5mA supply current (Vcc = 12V).
20 mA output drive
Temperature and voltage stability
Models available with short-circuit protection
Frequency response to 100KHz

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

[Download not found]

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

[Download not found]

RARA HPS

High Power Precision Shunt Resistor
Resistance range from 0.001Ω to 0.01Ω *
Tolerances of ±0.05% to ±1%
TCR of ±5ppm/℃, ±10ppm/℃ *
Power rating of 250W (on a suitable heat sink)
Temperature range from -55°C to +100°C

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

RARA SMW Series

High-power wire wound surface-mount resistors
Power ratings available: 2W, 3W, and 5W
Wide resistance range: 0.1Ω to 500Ω
Precision tolerances: ±1% & ±5%
Temperature coefficient: 200 ppm/°C
Flameproof UL94V0 molded package for high safety

Cissoid CMT-PLA3SB12340A

Silicon Carbide (SiC) MOSFET Intelligent Power Module
3-phase inverter with anti-parallel diodes
Drain-to-source Breakdown Voltage of 1200V
Max Continuous Current of 340A/260A at Tc=25°C/90°C
Low On Resistance of 3.25 mΩ typical
Junction Temperature: -40°C to +175°C

Caddock TG Series

Precision high voltage axial leaded through-hole resistor
Maximum operating voltage from 4kV up to 30kV (standard series)
Utilises Caddock’s Tetrinox® resistance film to achieve the unique combination of low TCR and high stability performance
Load life stability of 0.25% per 1,000 hours at +125°C
-15 series increases the maximum voltage ratings by 60% (48kV for the TG1015 model)
Maximum continuous operating temperature of +225°C

CotoMOS® C224S

High-current MOSFET relay
Load Voltage: 40V
Load Current: 3.5A
Low On-Resistance: 0.05Ω Nominal
Arc-Free with no Snubbing Circuits
High-Reliability Solid State Design

CotoMOS® C241S

High-current MOSFET relay
Provides 1500V of input to output isolation.
High current switching capability to 5A
Low on resistance of 0.02Ω Nominal
Arc-Free with no Snubbing Circuits
High-Reliability Solid State Design

Coto 9290 Series

Surface-mount SIP reed relays
High insulation resistance of 10¹²Ω minimum
Switching current 0.5A
50Ω Coaxial shield
Moulded 6 pin SIP package with optional gull wing or J-lead connections
Temperature range −20°C to +85°C

Merit Sensor HTS Series

Surface mountable analog and digital pressure sensor
Pressure ranges from 1 to 100 psi
Absolute or Gauge options available
Temperature range −40°C to +125°C
Compatible with wet, corrosive media

Merit Sensor S Series

Precision MEMS silicon pressure sensor die
Pressure ranges of 5 to 300psi / 0.34 to 21 bar
Pressure type of absolute or gauge
Temperature range −40°C to +150°C
Full scale outputs from 60mV to 180mV (at 5V excitation)
Impedance of 5kΩ (typical)
Suitable for clean, dry air and non-corrosive gases media

NVE AD004-00E

Digital NPN Open-Collector output
4.5Vcc to 30Vcc supply voltage
MSOP8 package
2.5mA supply current (Vcc = 12V).
20 mA output drive
Temperature and voltage stability
Models available with short-circuit protection
Frequency response to 100KHz

RARA FRH 25C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 15W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA FRH 50C

Metal clad thick film resistor
Resistance range from 1kΩ to 2MΩ
Max power rating of 25W
Cement moulding within aluminium housing
Short time overload of 2 x power rating is 5 seconds
High stability at conventional power ratings
Temperature range of -55°C up to +250°C

RARA HPS

High Power Precision Shunt Resistor
Resistance range from 0.001Ω to 0.01Ω *
Tolerances of ±0.05% to ±1%
TCR of ±5ppm/℃, ±10ppm/℃ *
Power rating of 250W (on a suitable heat sink)
Temperature range from -55°C to +100°C

RARA IRB60

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 270Ω
Non-inductive resistance between 0.1Ω and 56Ω
Power rating of 60W
Insulation resistance of 20MΩ minimum
Short time overload of 5 x power rating is 5 seconds

RARA IRB80

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 910Ω
Non-inductive resistance between 0.1Ω and 110Ω
Power rating of 80W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRB120

Metal clad wire wound economy resistor
Inductive resistance between 0.1Ω and 1.3kΩ
Non-inductive resistance between 0.1Ω and 300Ω
Power rating of 120W
Insulation resistance of 20MΩ minimum
Short time overload of 10 x power rating is 5 seconds

RARA IRF100

Flat type metal clad wire wound resistor
Resistance options from 1Ω up to 1.1kΩ
Power rating of 100W (on a heat sink)
Tolerance options between ±0.5% and ±10.0%
TCR of +260 ppm/°C maximum
For UL Approval see the ULF Series

Resources

Industrial