![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.eu/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
English
GermanMedical
A variety of analog and digital magnetic sensors and digital isolators based on TMR (Tunelling Magnetoresistance) and GMR (Giant Magnetoresistance) technology, available in ultra miniature packages suitable even for portable and implantable medical devices
Range of high quality high voltage relays with rhodium or tungsten contacts, achieving extremely low contact resistance or high switching voltages, respectively
MEMS sensing elements and pressure sensors and general purpose load cells offering high quality, robust build and excellent characteristics
Range of surface-mount chip ultra precision as well as high ohmic resistors, available in virtually any resistance value within their range, and including non-magnetic models, high-temperature models, resistors with no organics etc.
- Single-channel, radiation-hardened optocoupler for space applications
- Surface mount 4-pin package
- High current transfer ratio
- Withstands up to 1,000V DC isolation
- Ionizing dose tested to 150 Krad(Si)
- Single-channel optocoupler for space applications
- Hermetically sealed 6-pin DIP package
- High current transfer ratio
- Withstands 1,500V DC isolation
- Ionising dose tested to 150 Krad(Si) and
- Tested displacement damage to 1 MEV x 10¹³
- Single-channel, high-speed optocoupler for space and isolation applications
- Hermetically sealed 8-pin DIP package
- High common mode rejection (1,000V/μs)
- Withstands 1,500V DC and 2,500V DC isolation
- Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³
- Single-channel high-gain optocoupler for space applications
- Hermetically sealed 4-pin surface mount package
- Current transfer ratio up to 1,500%
- Low input current requirement of 0.5mA
- Withstands up to 1,000V DC isolation
- Single-channel optocoupler for space applications
- Hermetically sealed LCC-6 package
- High current transfer ratio
- Low input requirements
- Withstands up to 1,000V DC isolation
- Single channel optocoupler for high-reliability applications
- Hermetically sealed 6-pin package
- High current transfer ratio
- Withstands up to 1,000V DC isolation
- Radiation tested to 150 Krad(Si)
- Dual-channel or Quad-channel, high-gain optocoupler
- Hermetically sealed 16-pin flatpack package
- Current transfer ratio typically 1,000%
- Low input requirement of 0.5mA
- Withstands 1,500V DC
- Radiation-tolerant
- Dual-channel or Quad-channel, high-reliability optocoupler for space
- Hermetically sealed 16-pin flatpack package
- High current transfer ratio
- Radiation tolerance of 150 Krad(Si)
- Withstands up to 1,500V DC isolation
- Single-channel, hermetically sealed optocoupler
- LCC-6 package design
- Maximum continuous forward current: 50mA
- Input-to-Output isolation voltage: 1,000V DC
- Suitable for isolating high-speed digital or analog signals
- High-power wire wound surface-mount resistors
- Power ratings available: 2W, 3W, and 5W
- Wide resistance range: 0.1Ω to 500Ω
- Precision tolerances: ±1% & ±5%
- Temperature coefficient: 200 ppm/°C
- Flameproof UL94V0 molded package for high safety
Cell Guard is a CAN based environmental measurement sensor that can measure:
- Absolute Pressure: 0.3 to 1.2 Bar
- Air Temperature: -40°C to +125°C
- Volatile Organic Compounds (VOCs): 0 to 6553.5 ppm
- Absolute Humidity: 0 to 35000mg/m3
- Relative Humidity: 0 to 100%
- Dew Point Temperature: 0 to 100°C
- Shock load and duration up to ±24G
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 9 G (typical)
- Average supply current of 135nA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Omnipolar push-pull response
- Operating frequency of 10 Hz
- SOT-23-3 (511) or LGA-4 (512) package
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 9 G (typical)
- Average supply current of 1.3μA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Omnipolar push-pull response
- Operating frequency of 250Hz
- SOT-23-3 (511) package
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 15 G (typical)
- Average supply current of 12μA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Omnipolar push-pull response
- Operating frequency of 2500Hz
- SOT-23-3 (511) package
- TMR digital push-pull magnetic sensor
- Operate sensitivity of 10 G (typical)
- Average supply current of 1.9μA at 3V (typical)
- Supply voltage range of 1.7V to 5.5V
- Bipolar Latching push-pull response
- Operating frequency of 500Hz
- SOT-23-3 (511) package
- Room temperature calibrated pressure sensor
- Available for air, gas and liquid media
- Custom options available
- Utilises a piezoresistive Wheatstone bridge with a chemically etched silicon diaphragm
- Suitable for high volume and low to medium-pressure applications
