Military

ISOCOM CH101

Single-channel, radiation-hardened optocoupler for space applications
Surface mount 4-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Ionizing dose tested to 150 Krad(Si)

Add to Compare

Datasheet

ISOCOM CS201

Single-channel optocoupler for space applications
Hermetically sealed 6-pin DIP package
High current transfer ratio
Withstands 1,500V DC isolation
Ionising dose tested to 150 Krad(Si) and
Tested displacement damage to 1 MEV x 10¹³

Add to Compare

Datasheet

ISOCOM CS600

Single-channel, high-speed optocoupler for space and isolation applications
Hermetically sealed 8-pin DIP package
High common mode rejection (1,000V/μs)
Withstands 1,500V DC and 2,500V DC isolation
Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³

Add to Compare

Datasheet

ISOCOM CSM100

Single-channel high-gain optocoupler for space applications
Hermetically sealed 4-pin surface mount package
Current transfer ratio up to 1,500%
Low input current requirement of 0.5mA
Withstands up to 1,000V DC isolation

Add to Compare

Datasheet

ISOCOM CSM1200

Single-channel optocoupler for space applications
Hermetically sealed LCC-6 package
High current transfer ratio
Low input requirements
Withstands up to 1,000V DC isolation

Add to Compare

Datasheet

ISOCOM CSM1224

Single channel optocoupler for high-reliability applications
Hermetically sealed 6-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Radiation tested to 150 Krad(Si)

Add to Compare

Datasheet

ISOCOM CSM160

Dual-channel or Quad-channel, high-gain optocoupler
Hermetically sealed 16-pin flatpack package
Current transfer ratio typically 1,000%
Low input requirement of 0.5mA
Withstands 1,500V DC
Radiation-tolerant

Add to Compare

Datasheet

ISOCOM CSM166

Dual-channel or Quad-channel, high-reliability optocoupler for space
Hermetically sealed 16-pin flatpack package
High current transfer ratio
Radiation tolerance of 150 Krad(Si)
Withstands up to 1,500V DC isolation

Add to Compare

Datasheet

ISOCOM IS49

Single-channel, hermetically sealed optocoupler
LCC-6 package design
Maximum continuous forward current: 50mA
Input-to-Output isolation voltage: 1,000V DC
Suitable for isolating high-speed digital or analog signals

Add to Compare

Datasheet

Metis Engineering Cell Guard

Cell Guard is a CAN based environmental measurement sensor that can measure:

Absolute Pressure: 0.3 to 1.2 Bar
Air Temperature: -40°C to +125°C
Volatile Organic Compounds (VOCs): 0 to 6553.5 ppm
Absolute Humidity: 0 to 35000mg/m3
Relative Humidity: 0 to 100%
Dew Point Temperature: 0 to 100°C
Shock load and duration up to ±24G

For quick desktop analysis, use alongside the Cell Guard Development Kit.

Add to Compare

Datasheet

Caddock USF240 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 300V
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

Caddock USF270 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 1.4kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

Caddock USF271 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 2.5kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

Caddock USF340 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 300V
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

Caddock USF370 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 1.4kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

Caddock USF371 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 2.5kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Add to Compare

Datasheet

ISOCOM CH101

Single-channel, radiation-hardened optocoupler for space applications
Surface mount 4-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Ionizing dose tested to 150 Krad(Si)

ISOCOM CS201

Single-channel optocoupler for space applications
Hermetically sealed 6-pin DIP package
High current transfer ratio
Withstands 1,500V DC isolation
Ionising dose tested to 150 Krad(Si) and
Tested displacement damage to 1 MEV x 10¹³

ISOCOM CS600

Single-channel, high-speed optocoupler for space and isolation applications
Hermetically sealed 8-pin DIP package
High common mode rejection (1,000V/μs)
Withstands 1,500V DC and 2,500V DC isolation
Radiation tested to 1 Mrad(Si) and 1 MEV x 10¹³

ISOCOM CSM100

Single-channel high-gain optocoupler for space applications
Hermetically sealed 4-pin surface mount package
Current transfer ratio up to 1,500%
Low input current requirement of 0.5mA
Withstands up to 1,000V DC isolation

ISOCOM CSM1200

Single-channel optocoupler for space applications
Hermetically sealed LCC-6 package
High current transfer ratio
Low input requirements
Withstands up to 1,000V DC isolation

ISOCOM CSM1224

Single channel optocoupler for high-reliability applications
Hermetically sealed 6-pin package
High current transfer ratio
Withstands up to 1,000V DC isolation
Radiation tested to 150 Krad(Si)

ISOCOM CSM160

Dual-channel or Quad-channel, high-gain optocoupler
Hermetically sealed 16-pin flatpack package
Current transfer ratio typically 1,000%
Low input requirement of 0.5mA
Withstands 1,500V DC
Radiation-tolerant

ISOCOM CSM166

Dual-channel or Quad-channel, high-reliability optocoupler for space
Hermetically sealed 16-pin flatpack package
High current transfer ratio
Radiation tolerance of 150 Krad(Si)
Withstands up to 1,500V DC isolation

ISOCOM IS49

Single-channel, hermetically sealed optocoupler
LCC-6 package design
Maximum continuous forward current: 50mA
Input-to-Output isolation voltage: 1,000V DC
Suitable for isolating high-speed digital or analog signals

Metis Engineering Cell Guard

Cell Guard is a CAN based environmental measurement sensor that can measure:

Absolute Pressure: 0.3 to 1.2 Bar
Air Temperature: -40°C to +125°C
Volatile Organic Compounds (VOCs): 0 to 6553.5 ppm
Absolute Humidity: 0 to 35000mg/m3
Relative Humidity: 0 to 100%
Dew Point Temperature: 0 to 100°C
Shock load and duration up to ±24G

For quick desktop analysis, use alongside the Cell Guard Development Kit.

Caddock USF240 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 300V
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Caddock USF270 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 1.4kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Caddock USF271 Series

Ultra-stable radial leaded film through-hole resistors
Constructed with two selected USF300 series resistors bonded back to back for parallel connection on the PCB
Maximum working voltage of 2.5kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Caddock USF340 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 300V
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Caddock USF370 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 1.4kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Caddock USF371 Series

Ultra-stable radial leaded film through-hole resistors
Maximum working voltage of 2.5kV
Ceramic package provides cool operation
Utilising Caddock’s proprietary resistance film systems
Available in standard resistance values most commonly used in precision analog design
Zero nominal TCR
Temperature range from -40°C up to +85°C

Resources

Military

Selection of ‘EEE’ approved surface-mount current sensing resistors by Isabellenhütte and ultra-precision resistors from Vishay Foil Resistors
Selection of Military grade surface mount, high voltage chip resistors from Ohmcraft.

Cissoid’s range of semiconductors designed especially for high temperature applications and harsh environments.

‘EEE’ approved pressure sensors from Emerson Paine™.

Robust and accurate general purpose load cells from Lord Sensing Stellar Technology.

Thermocouple foil temperature sensors by RdF.

Aerospace

Audio

Automotive

Energy

Industrial

Medical

Military

Oil & Gas

Renewables

Military

Resources

Military

Products

Help & Services

Privacy & Legal