1Ω series
Supporting Manufacturer Information
- Ultra-stable primary standard resistor
- Resistance range from 1Ω to 10KΩ
- Accuracy of ±2 ppm
- TCR of ±0.05 ppm/°C
- Power rating of 1W
- long-term stability of resistance 0.5 ppm/year
- Wirewound axial leaded precision resistor
- Resistance range from 1Ω up to 699kΩ
- Tight tolerances of ±0.01% and ±0.1%
- TCR of ±5 ppm/°C
- Power rating from 0.33W (8G16D model)
- Temperature range from -55°C up to +160°C
- Wirewound axial leaded precision resistor
- Resistance range from 1Ω up to 699kΩ
- Tight tolerances of ±0.01% and ±0.1%
- TCR of ±5 ppm/°C
- Power rating up to 0.33W (8E16D model)
- Temperature range from -55°C up to +160°C
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.75kΩ
- Power rating of 150W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.2kΩ
- Power rating of 200W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.79kΩ
- Power rating of 250W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 3.5kΩ
- Power rating of 300W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 4.45kΩ
- Power rating of 400W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 5.78kΩ
- Power rating of 500W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For UL Approval see the ULF Series
- Flat and narrow type metal clad wire wound resistor
- Cement or silicone filling material with an extruded aluminium housing
- 300mm flying leads
- Excellent heat dissipation
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
- Short time overload of 5 x power rating is 5 seconds
- Flat and narrow type metal clad wire wound resistor
- Cement or silicone filling material with an extruded aluminium housing
- 300mm flying leads
- Excellent heat dissipation
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
- Short time overload of 5 x power rating is 5 seconds
- Flat and narrow type metal clad wire wound resistor
- Cement or silicone filling material with an extruded aluminium housing
- 300mm flying leads
- Excellent heat dissipation
- Insulation resistance of 20MΩ minimum
- Temperature range of -55°C up to +200°C (cement) / +150°C (silicone)
- Short time overload of 5 x power rating is 5 seconds
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.1kΩ
- Power rating of 100W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 1.75kΩ
- Power rating of 150W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series
- Flat type metal clad wire wound resistor
- Resistance options from 1Ω up to 2.2kΩ
- Power rating of 200W (on a heat sink)
- Tolerance options between ±0.5% and ±10.0%
- TCR of +260 ppm/°C maximum
- For Non UL Approval see the IRF Series