Alpha RWA Series

  • Alpha Electronics

Product Features

  • High precision wraparound resistor
  • Resistance range form 100Ω to 5kΩ
  • Tolerance of ±005% or ±0.1%
  • TCR of ±5 ppm/°C
  • Power rating of 0.1W (at 70°C)
  • Temperature range from -65°C to +155°C

Applications

The RWA precision wraparound SMD resistor series from Alpha Electronics offers resistances from 100Ω up to 5kΩ, all with a small 0603 chip size. By utilising Alpha’s Bulk Metal® foil resistor technology, they are able to offer low tolerances down to ±0.05% (between 1kΩ and 5kΩ) as well as a low TCR of ±5 ppm/°C (between -25°C and +125°C) over the whole resistance range. The Alpha RWA series also offers excellent load-life stability of ±0.005% typical (+70°C, 2000 hours at rated power).

  • High precision wraparound SMD resistor
  • Available in any resistance between 100Ω and 5kΩ
  • 2-terminal resistor in a 0603 surface-mount package
  • Power rating of 0.1W at +70°C
  • Tolerances as low as ±0.05% over the resistance range of 1kΩ to 5kΩ
  • Tight TCR available of ±5 ppm/°C over the resistance range of 100Ω to 5kΩ
  • Maximum working voltage of 22V
  • Maximum rated operating temperature +70°C
  • Temperature range from -65°C up to +155°C

 

The RWA high precision wraparound surface-mount resistor series offers high precision and excellent stability thanks to Alpha’s Bulk Metal® foil resistor technology, making them suitable for the most demanding precision applications.

 

The below table gives the full specifications for each resistor model available including the Alpha RWA series:

Alpha RWA Specifications

 

Alpha RWA Series

Clear
Quantity
Calculators and Convertors

Work out what you need for your project. Go to calculators and convertors

Contact us if you need your items quicker or need more than in stock.

Specifications

Weight 0.00000 kg
Dimensions 0.50 x 0.80 x 1.60mm
Maximum Resistance

5KΩ

Minimum Resistance

100Ω

Power Rating

Product Type

,

Resistance Value

,

Series / Model

Temperature Coefficient

Temperature Range (°C)

-65 to +155°C

Termination / Connection

Wrap-around Terminals

Tolerance

,

Alpha Resistor Videos

We are pleased to provide you with a range of videos, please see below for the latest content available:

 

 

VIDEOS
Place holder video for YouTube video Resistor Stability Put to the Test (Demo Video)

In this video, our host Richard Zuratt puts the stability of the three major resistor technologies — foil, thin, and thick film — to the test. Each resistor type is subjected to an overload pulse and its change in resistance value is recorded. Due to the homogeneous nature of the VPG Bulk Metal® Foil resistor, it is the only of the three to experience no change from the high power pulse. This demonstrated performance makes foil resistors the technology of choice for critical applications where long-term stability and survivability are paramount.

Place holder video for YouTube video Advantages of Using Bulk Metal® Foil Resistors in High-Humidity Environments

All resistors that are based on nichrome, which is a category that includes both thin film devices and Bulk Metal Foil resistors, are susceptible to electro-chemical corrosion or etching when placed in a high humidity environment and powered with a very low wattage. But since the nichrome element of a Bulk Metal Foil resistor is hundreds of times thicker than the element in a thin film device with the same value, it will last much longer under these conditions. This video shows the actual etching process and survival times for thin film and foil nichrome resistive elements as they are tested in 100% humidity conditions.

Place holder video for YouTube video Comparison Testing of Chip Resistor Technologies Under High Vibration

Surface-mount resistors suffer physical stresses when exposed to high vibration or thermally unstable environments. Failure modes commonly occur in welds, solder joints, connectors, and terminations, ultimately resulting in circuit failure. In this demonstration, vibration-table-mounted boards are subjected to ±2° deflection 25 times per second and monitored for any ΔR > 0.1%. All the chip resistors failed in 2 to 12 minutes (8K to 16K cycles). But the Alpha MPP molded Bulk Metal® Z-Foil resistor with flexible terminations experienced over a million cycles with no change in resistance.

VIDEOS
Place holder video for YouTube video
Resistor Stability Put to the Test (Demo Video

In this video, our host Richard Zuratt puts the stability of the three major resistor technologies — foil, thin, and thick film — to the test. Each resistor type is subjected to an overload pulse and its change in resistance value is recorded. Due to the homogeneous nature of the VPG Bulk Metal® Foil resistor, it is the only of the three to experience no change from the high power pulse. This demonstrated performance makes foil resistors the technology of choice for critical applications where long-term stability and survivability are paramount.

Place holder video for YouTube video
Advantages of Using Bulk Metal® Foil Resistors in High-Humidity Environments

All resistors that are based on nichrome, which is a category that includes both thin film devices and Bulk Metal Foil resistors, are susceptible to electro-chemical corrosion or etching when placed in a high humidity environment and powered with a very low wattage. But since the nichrome element of a Bulk Metal Foil resistor is hundreds of times thicker than the element in a thin film device with the same value, it will last much longer under these conditions. This video shows the actual etching process and survival times for thin film and foil nichrome resistive elements as they are tested in 100% humidity conditions.

Place holder video for YouTube video

Surface-mount resistors suffer physical stresses when exposed to high vibration or thermally unstable environments. Failure modes commonly occur in welds, solder joints, connectors, and terminations, ultimately resulting in circuit failure. In this demonstration, vibration-table-mounted boards are subjected to ±2° deflection 25 times per second and monitored for any ΔR > 0.1%. All the chip resistors failed in 2 to 12 minutes (8K to 16K cycles). But the Alpha MPP molded Bulk Metal® Z-Foil resistor with flexible terminations experienced over a million cycles with no change in resistance.

Alpha RWA Series Resources

Product Datasheet

Supporting Product Information

Supporting Manufacturer Information

Related products

  • Alpha Electronics

Alpha RWA Series