The CRB 0805-HT high temperature, non-magnetic, trimmable chip resistor series from SRT Resistor Technology offers the same features as the CRB 0805 range, while allowing for high temperature applications of up to 300°C. The main features comprise of a resistance range from 1Ω up to 10MΩ, power rating of 0.125W and voltage rating of 100V trimmed or 300V untrimmed (trimming ratios 1.5/single cut), all in a small 0805 package. By utilising SRT’s thick film resistor technology, they are able to offer low tolerances down to ±5.0% and TCR as low as ±50 ppm/°C (between 10Ω and 10MΩ). The CRB 0805-HT resistor series is suitable for laser and air-abrasive trimming, and offers PtAg (Platinum-Silver), unpassivated contact areas suitable for soldering and conductive gluing. These resistors contain no organics, making them suitable for high vacuum applications.
High temperature trimmable thick film chip resistor
Available in any resistance between 1Ω and 10MΩ
0805 package
Suitable for high temperature applications – operating temperature range of -55°C to +300°C
Power rating of 0.125W at +70°C
Voltage rating of 100V trimmed or 300V untrimmed (trimming ratios 1.5/single cut)
Tolerances as low as ±5.0% over the resistance range of 10Ω up to 10MΩ
TCR as low as ±50 ppm/°C over the resistance range of 10Ω to 10MΩ
Suitable for laser and air-abrasive trimming
High trimming ratios by special geometries
PtAg (Platinum-Silver), unpassivated contact areas for soldering and conductive gluing
Non-magnetic
No organics
Non-symmetric tolerances are also available (e.g. -0/+20%), please contact us for more information.
Please see the derating curve below for the CHx-HT, CRB-HT and CBW-HT series from 0°C to +300°C:
The final measuring of the resistors takes place at room temperature (independent of TCR).
Please pay attention to the interconnection technology at high temperature applications.
Please note, the tolerance for the CRB 0805-HT series starts from ±5%, whereas the below table gives the full specifications of the standard CRB series:
1) Detailed information on request 2) TC50: Temperature range +25°C…+85°C; TK50 not in the resistance range<100R 3)Continuous operating voltage U=√(P*R)
This product is available compliant to the RoHS EU directive 2011/65/EU, however, the following exemptions according to the RoHS annex are applicable:
No. 7(a) – 'Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead)' used in leaded resistors
No. 7(c)-I – 'Electrical and electronic components containing lead in glass or ceramic…or in a glass or ceramic matrix compound' used in chip resistors and leaded thick film resistors
SRT CRB-HT Technical Library
We are pleased to provide you with a range of additional content including videos, product datasheets, case studies, white papers and application notes for your reference. Please see below for the latest content available:
High temperature trimmable thick film chip resistor,
0805 package size,
Temperature range of -55°C to +300°C,
Voltage rating of 100V trimmed or 300V untrimmed (trimming ratios 1.5/single cut),
No organics,
PtAg (Platinum-Silver), unpassivated contact areas for soldering and conductive gluing,
Non-magnetic,
Suitable for laser and air-abrasive trimming,
High trimming ratios by special geometries.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.