![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.eu/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
English
German
Theย CS54 non-incendive differential pressure transducerย is a high-strength sensor designed for differential pressure measurements of liquids and gases in Class I, Division 2 hazardous locations. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4โณ MNPT or FNPT process connections.
In an effort to simplify installation in Class I, Division 2 hazardous locations, theย CS54ย is offered with an integral Turckยฎ Minifastยฎ electrical connection.
When combined with a CSA Division 2 approved Turckยฎย cordset and a Turckยฎ Lokfast Guard, there is no requirement for a conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package.
- Non-Incendive Differential Pressure Transducer
- Differential pressure up to 50 PSI
- Line pressure up to 500 PSI **
- Bi-directional pressure ranges available
- Accuracy of โคยฑ0.25% BFSL / โคยฑ0.5% BFSL (2 PSI & below) *
- Stability (1 year) of โคยฑ0.25% of FS
- Pressure cycles of 4 million
- Overpressure of 2x or 500 PSI (whichever is less), configured differential pressure ***
- Burst pressure of 3x configured differential pressure ***
- Temperature range โ40ยฐC to +80ยฐC (-20 to +80ยฐC using DIN 43650-A)
- Media temperature of -40 to +125ยฐC (-40 to +105ยฐC using DIN 43650-A)
- Electrical output options of 4-20mA, 1-5V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
- 316L SS diaphragm / oil filled sensor element
- 1/4โ NPT or FNPT process connections
* Accuracy includes non-linearity, hysteresis and non-repeatability
** Max line pressure is the highest common mode pressure that can be applied to the sensor without damage
*** Overpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur
Approvals for the Core CS54 series include:
- CSA Class I, Division 2, Groups A, B, C, D T4 Approved
- ABS (American Bureau of Shipping) Approved
- CE
Note: Must use an approved barrier to maintain listed certifications. See page 4 of the datasheet for entity parameters.
Typical applications for the CS54 Non-Incendive Differential Pressure Transducer include:
- Filtration
- Cryogenic bulk tank level measurement
- External fuel tank level measurement
- Compression systems
- Test stands
Performance, Thermal, Environmental & Physical Specifications Table
| Attribute | Value |
|---|---|
| Accuracy at 25ยฐC * | โคยฑ0.25% BFSL โคยฑ0.5% BFSL (2 PSI & below) |
| Stability (1 Year) | โคยฑ0.25% of FS |
| Pressure Cycles | 4 million |
| Maximum Line Pressure ** | 500 PSI |
| Overpressure *** | 2x or 500 PSI (whichever is less, configured differential pressure) |
| Burst Pressure *** | 3x configured differential pressure |
| Operating Temperature | -40ยฐC to +80ยฐC -20ยฐC to +80ยฐC for DIN 43650-A |
| Media Temperature | -40ยฐC to +125ยฐC -40ยฐC to +105ยฐC for DIN 43650-A |
| Compensated Temperature | 0ยฐC to +55ยฐC |
| Storage Temperature | -40ยฐC to +125ยฐC |
| TC Zero | โคยฑ1% of FS โคยฑ2% of FS (2 PSI & below) |
| TC Span | โคยฑ1% of FS โคยฑ2% of FS (2 PSI & below) |
| EMI / RFI Protection | Yes |
| IP Rating ** | IP65 minimum |
| Vibration | 10g, 20 to 2000Hz |
| Shock | 100g, 11msec, 1/2 sine |
Electrical Specifications (Current)
| Attribute | Value |
|---|---|
| Outputs | 4 to 20mA |
| Excitation | 10 to 28VDC |
| Current Consumption | 20mA (typical) |
| Output Load | 0 to 800โฆ at 10 to 28VDC |
| Frequency Response | ~250Hz (minimum) |
| Zero Offset (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
| Span Tolerance (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
Electrical Specifications (Voltage)
| Attribute | Value |
|---|---|
| Outputs | 1 to 5V |
| Excitation | 10 to 28VDC |
| Current Consumption | <10mA |
| Output Load | 5kฮฉ (minimum) |
| Frequency Response | ~1kHz (minimum) |
| Zero Offset (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
| Span Tolerance (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
Electrical Specifications (Ratiometric Voltage)
| Attribute | Value |
|---|---|
| Outputs | 0.5 to 4.5V ratiometric |
| Excitation | 5VDC ยฑ0.5V |
| Current Consumption | <10mA |
| Output Load | 5kฮฉ (minimum) |
| Frequency Response | ~1kHz (minimum) |
| Zero Offset (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
| Span Tolerance (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
Electrical Specifications (Low Power Voltage)
| Attribute | Value |
|---|---|
| Outputs | 0.5 to 2.5V non-ratiometric |
| Excitation | 3 to 5VDC unregulated |
| Current Consumption | โค3mA |
| Output Load | 5kฮฉ (minimum) |
| Frequency Response | ~1kHz (minimum) |
| Zero Offset (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
| Span Tolerance (of FS) | โคยฑ0.5% (typical) ยฑ1% maximum |
Core Sensors design and manufacture high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.
