Core Sensors CS81 Series

  • Core Sensors

Product Features

  • Intrinsically safe low pressure transducer
  • Pressure ranges from 1 PSI to 49 PSI
  • Accuracy of โ‰คยฑ0.25% BFSL
  • Stability of โ‰คยฑ0.25% of FS (1 year)
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 245 PSI
  • CSA

Applications


The CS81 intrinsically safe low-pressure transducer from Core Sensors is a high-strength sensor designed for use in low-pressure class I, division 1 intrinsically safe environments. Available with pressure ranges from 1 PSI up to 49 PSI with an all welded stainless steel construction and customisable configurations. The CS81 offers a choice of electrical outputs and various wetted materials. This sensor series has an operating temperature range of -40ยฐC to +85ยฐC, a media temperature range of -40ยฐC to +125ยฐC and an accuracy of โ‰คยฑ0.25% BFSL.

The CS81 Intrinsically Safe Low-Pressure Transducer is certified by CSA to operate safely in Class I, Division 1 Intrinsically Safe rated locations when used with an approved current limiting barrier. The CS81 features a configurable design, allowing Core Sensors to tailor the transducer to your application’s operating requirements. The CS81 is offered in a low power configuration, capable of operating from an unregulated power supply of 3-5VDC and consuming 3mA or less of current.

  • Intrinsically safe low-pressure transducer
  • Pressure ranges available from 1 PSI up to 49 PSI
  • Accuracy of โ‰คยฑ0.25% BFSL (โ‰คยฑ0.5% BFSL 2 PSI & below) *
  • Stability of โ‰คยฑ0.25% of FS (1 year)
  • Pressure cycles of 100 million
  • Overpressure of 2x minimum
  • Burst pressure of 5x or 245 PSI (whichever is less)
  • Electrical output options of 4-20mA, 1-5V, 1-6V, 10mV/V, 0.5-4.5V ratiometric or 0.5-2.5V non-ratiometric
  • Temperature range โˆ’40ยฐC to +80ยฐC
  • Media temperature range of -40ยฐC to +125ยฐC
  • Wetted materials available of 17-4ph, 316L SS, Hastelloy C276 ** and Inconel 718 **
  • All welded stainless steel construction for a minimum IP65 rating ***
  • Contact us for customisable options

* Accuracy includes non-linearity, hysteresis and non-repeatability
** Special order item
*** IP Rating applies when the electrical connector is attached with the appropriate ingress protection and is dependent on the electrical termination selected. Contact us for more information.

Approvals for the Core CS81 series include:

  • CSA Class I, Division 1 groups C, D T4
  • Class I, Zone 0 AEx ia IIB T4 Ga (Ex ia IIB T4 Ga)
  • ABS (American bureau of shipping)
  • CE

Typical applications for the CS81 intrinsically safe low-pressure transducer series include:

  • Natural gas compression
  • Oil exploration
  • Process control

For details on the entity parameters of this part, please see page 4 of the datasheet linked above.


Performance, Thermal, Environmental & Physical Specifications Table

AttributeValue
Accuracy at 25ยฐC *โ‰คยฑ0.25% BFSL
โ‰คยฑ0.5% BFSL (2 PSI & below)
Stability (1 Year)โ‰คยฑ0.25% of FS
Pressure Cycles100 million
Overpressure2x minimum
Burst Pressure5x or 245 PSI (whichever is less)
Operating Temperature-40ยฐC to +80ยฐC
-20ยฐC to +80ยฐC for DIN 43650-A
Media Temperature-40ยฐC to +125ยฐC
-40ยฐC to +105ยฐC for DIN 43650-A
Compensated Temperature0ยฐC to +55ยฐC
Storage Temperature-40ยฐC to +125ยฐC
TC Zeroโ‰คยฑ1% of FS
โ‰คยฑ2% of FS (2 PSI & below)
TC Spanโ‰คยฑ1% of FS
โ‰คยฑ2% of FS (2 PSI & below)
EMI / RFI ProtectionYes
IP Rating **IP65 minimum
Vibration10g, 20 to 2000Hz
Shock100g, 11msec, 1/2 sine

Electrical Specifications (Current)

AttributeValue
Outputs4 to 20mA
Excitation10 to 28VDC
Current Consumption20mA (typical)
Output Load0 to 800โ„ฆ at 10 to 28VDC
Frequency Response~250Hz (minimum)
Zero Offset (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum
Span Tolerance (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum

Electrical Specifications (Voltage)

AttributeValue
Outputs1 to 5V
1 to 6V
Excitation10 to 28VDC
Current Consumption<10mA
Output Load5kฮฉ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum
Span Tolerance (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum

Electrical Specifications (Ratiometric Voltage)

AttributeValue
Outputs0.5 to 4.5V ratiometric
Excitation5VDC ยฑ0.5V
Current Consumption<10mA
Output Load5kฮฉ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum
Span Tolerance (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum

Electrical Specifications (Low Power Voltage)

AttributeValue
Outputs0.5 to 2.5V non-ratiometric
Excitation3 to 5VDC unregulated
Current Consumptionโ‰ค3mA
Output Load5kฮฉ (minimum)
Frequency Response~1kHz (minimum)
Zero Offset (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum
Span Tolerance (of FS)โ‰คยฑ0.5% (typical)
ยฑ1% maximum

Electrical Specifications (Millivolt)

AttributeValue
Outputs10mV/V
Excitation5VDC (typical)
Current Consumption<5mA
Output Impedance >1Mโ„ฆ
Frequency Response~5kHz (minimum)
Zero Offset (of FS)โ‰คยฑ2% (maximum)
Span Tolerance (of FS)โ‰คยฑ2% (maximum)


ImageText
danger icon Caution must be taken when installing and operating the CS80, CS81, CS82 and CS84 in known Class I, Division 1, Groups A,B,C,D hazardous locations. Any misuse or improper installation may impair the equipmentโ€™s intended use and/or protection ratings. Thoroughly read and understand the operating instructions prior to installation. Call us on +44 (0) 1342 330 470 if you are unsure about any of the precautions or instructions or require other details on this or any other core sensor components.


Core Sensors design and manufacture high-quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allow Core to create solutions to some of the most complex sensor requirements. Please visit https://core-sensors.com for more information.

Core Sensors CS81 Series

Clear
Quantity
Calculators and Convertors

Work out what you need for your project. Go to calculators and convertors

Contact us if you need your items quicker or need more than in stock.

Specifications

Weight 0.00000 kg
Dimensions 0.00 x 0.00 x 0.00mm
Product Type

Process Connection

1/4โ€ Male NPT, 1/2โ€ Male NPT, 7/16-20 Male UNF, G1/4 Male, Form E

Wetted Material

,

Pressure Range

Pressure Unit

Bar, Inches of H2O, PSI

Pressure Type

, , ,

Output

4 to 20mA, 0.5 to 2.5V non-ratiometric, 0.5 to 4.5V ratiometric, 1 to 5V, 1 to 6V, 10mV/V

Electrical

1/2" MNPT conduit with strain relief, Cable, Deutsch DT04-3P, Deutsch DT04-4P, DIN 43650, Form A, M12x1, Mini-DIN, Form C, Packard 3-Pin

Options

No special options

Lead Length

No cable, 1m, 2m, 3m

Accuracy

โ‰ค ยฑ0.25% BFSL, โ‰ค ยฑ0.5% BFSL (2 PSI)

Temperature Range (ยฐC)

-40 to +80ยฐC

Series / Model

Core Sensors CS81 Series Ordering Info

Below is the model number configuration for the CS81 series from Core Sensors.

Ordering example: CS81-2A00010PG4D000-00
CS81XXXXXXXXXXXXXXXX

Series / Model (CS81)

CS81
CS81

Process Connection (X)

1
1/2โ€ Male NPT
2
1/4โ€ Male NPT
4
7/16-20 Male UNF
C
G1/4 Male, Form E

Wetted Material (X)

A
316L SS
C
Hastelloyยฎ C276

Pressure Range (XXXXX)

Insert 5digit pressure code, max 49 PSI
i.e. 00049 = 49 PSI

Pressure Unit (X)

B
Bar
P
PSI
W
Inches of H2O

Pressure Type (X)

A
Absolute
B
Bidirectional
G
Gauge
V
Vacuum (gauge)

Output (X)

1
1 to 5V
2
0.5 to 4.5V ratiometric
3
1 to 6V
4
4 to 20mA
8
0.5 to 2.5V non-ratiometric
9
10mV/V

Electrical (X)

A
M12x1
B
Deutsch DT04-4P
C
Packard 3-Pin
D
Mini-DIN, Form C
E
Deutsch DT04-3P
F
DIN 43650, Form A
L
Cable
Z
1/2″ MNPT conduit with strain relief

Options (XXX)

000
No special options

Lead Length (XX)

00
No cable
01
1m
02
2m
03
3m

Core Sensors CS81 Series Resources

Product Datasheet

Supporting Product Information

Supporting Manufacturer Information

Related products

  • Core Sensors

Core Sensors CS81 Series