![Rhopoint Components Logo Blue/Black (smaller version) [SVG]](https://www.rhopointcomponents.eu/wp-content/uploads/2020/09/RC-logo-master.svg){kind=logo}
English
English
German±0.25pF series
- DC ceramic disk capacitor
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 10,000 MΩ min at 100Vdc over 1 minute
- NP0 (C0G) Chip ceramic capacitor with negative TC
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kH (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- MLCC Capacitor for RF and Microwave communication
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 5.10-4 at 1Vrms and 1MHz for values ≤ 1000pF and under 5.10-4 at 1Vrms and 1KHz for values > 1000pF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- High Temperature, ultra stable MLCC Capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- Better voltage behaviour compared to X7R dielectric
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Ultra stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor under 10.10-4 at 1Vrms and 1kHz (or 1MHz)
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Stable ceramic capacitor
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025 at 1kHz for C over 1nF, and up to 0.025 at 1MHz for C up to 1nF
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Radial dipped NP0 capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
- Radial dipped NP0 capacitor series
- Highest quality and reliability, suitable for safety-critical industries
- Dissipation factor up to 0.025
- Insulation resistance of 25°C/Un 105 MΩ or 1000 Ohm-Farad whichever is less and 125°C/Un 104 MΩ or 100 Ohm-Farad whichever is less
- Dielectric strength test performed per method 103 of EIA 198-2-E
